ENTER A NEW LAB CASE

---

1 Choose Lab out under the Laboratory menu. This will bring up the Dental Lab Prescription window.

2 Click in the toolbar of this window.

3 Now, enter the lab case.

4 Click to save your changes.

VIEW A LIST OF ACTIVE LAB CASES

---

Choose Lab In... from the Laboratory menu.

VIEW A LIST OF ALL LAB CASES, ACTIVE OR NOT

---

1 Under Laboratory choose Reports. This will open up a window asking for a date range to restrict the list.

2 Enter two dates into the window and click on OK.

This will present a list of all lab cases that occurred between the dates entered.

EDIT A LAB CASE

---

1 Bring up the Active Lab Cases window by choosing Lab in... from the Laboratory menu. All current lab cases appear in the list in the Lab in menu item. They can be managed in this list.

If the case does not show up, then it is probably a completed case. To view a completed case, choose Reports from the Laboratory menu.

2 Double-click on the case or choose it and click on the Select button to bring up the laboratory case editor window, entitled Dental Lab Prescription.

3 Click in the toolbar.

4 Modify the information.

5 When done, click in the toolbar.

REMOVE A CASE FROM THE ACTIVE LIST

---

1 First, double-click on the case in the Active Lab Cases window to open the Dental Lab Prescription window for that particular case.

2 Click on the button in this window.

3 Near the middle of the window is a check box marked Completed. Check this box to indicate that the case is over with and no longer active.

4 Once you have done so, click in the toolbar to save your changes.

That particular case will disappear from the active list, but can still be accessed using the Reports menu item under the Laboratory menu.