Frame

Simulating Welds
There are times when you may want to add welds to the frame or exhaust system. The newest kits usually have excellent weld details. But the older kits may need some improvements.

There are two methods I've used with very effective results.

  1. Tube Glue -  I use Testors tube glue to run a bead of glue to represent surface welds. I apply the glue with a straight pin in order to achieve a fine line. Let the glue dry and paint the part as you usual. I this method is particularly effective on exhaust pipes.
  2. Liquid Glue - I use Tamiya's Extra Thin Cement for corner welds. I apply the thin cement into the seam and let it soften the styrene. Then I use a straight pin held in my pin-vise to etch the seam in a welding motion. This results in a very realistic looking weld. I use this method on multipart swingarms like on the YZF-R1.
<< Previous

Next >>

Copyright © 2003, Kenneth W. Hartlen. All rights reserved

For more information visit www.interlog.com/~khartlen

Home - Articles - News - Tips - What's New - Workshop