|
Axles Front and Rear Axles Some motorcycles, especially on Sportbikes like the Yamaha YZF-R1, have hollow axles. This is done to save weight on the motorcycle. These can easily be replicated by replacing the kit's axle screw with a piece of brass tubing. If the 1:1 axle is solid, then use a piece steel wire. Look for the K&S rack in you hobby shop for steel rod and tubing. The 3/32" brass tubing and steel rod is a perfect fit for most of Tamiya's 1/12 motorcycles.
|
||
|
Copyright © 2003, Kenneth W. Hartlen. All rights reserved For more information visit www.interlog.com/~khartlen |
||
|
|